Do You Know How to Use SMT Splice Spliers and Pliers Carrier in SMT Production Line？

 How to Use the SMT Splice Splier

Prepare the Tapes: Ensure that both ends of the component tapes to be spliced are clean and free of damage. Cut the ends straight to facilitate a smooth splice.

Load the Tapes into the Splicer: Open the SMT Splice Splier and place the ends of the two tapes into the alignment guides. Ensure that they overlap slightly for a secure splice.

Align the Tapes: Use the built-in guides to align the tapes precisely. This step is crucial to avoid any misalignment that could lead to component misfeeds.

Activate the Splicer: Once the tapes are aligned, press the handles of the splicer together to crimp the splice clip over the tapes. The splicer will apply even pressure to ensure a secure and reliable connection.

Inspect the Splice: After splicing, inspect the joint to ensure it is secure and aligned correctly.

How to Use the Pliers Carrier

Prepare the Carrier: Open the Pliers Carrier and check that the gripping mechanism is functioning correctly.

Load the Tape: Place the component tape into the carrier, ensuring that it is held securely. The tape should not slip or move during transfer.

transfer the Tape: Use the carrier to transfer the tape from storage to the assembly line. The secure grip ensures that the tape remains undamaged and properly aligned.

Unload the Tape: Once at the assembly line, carefully unload the tape from the carrier, ensuring it is ready for use in the pick-and-place machine.

The above are spliers’method of application, I believe it can bring you some help in the work, the next Yangling Electronics will tell you about smt details, welcome to contact Nancy if you are interested in our products.

Some information comes from the internet, if there is infringement, please contact us at 13580828702.