Water-Based Steel Mesh Cleaning Machine for Stencil Cleaning

Water-based steel mesh: Working Principle and Application Scenarios

1. Working principle

The spray-type cleaning machine is a device that achieves surface cleaning through high-pressure liquid spraying. Its core working principle is as follows:

Liquid pressurization: The cleaning solution (water-based or solvent-based) is pressurized by a high-pressure pump (typically 0.5-10MPa) to form a high-speed jet.

Nozzle ejection: The liquid forms a fan-shaped, conical or straight beam flow through a precision nozzle, impacting the surface of the workpiece.

Contaminant stripping: High-pressure liquid flow washes, dissolves or shears dirt (such as grease, particles, flux, etc.).

Circulating filtration: The cleaning solution is recycled and filtered for reuse, reducing waste.

Drying treatment: Some models are equipped with air knives or hot air drying to prevent water stains from remaining.

2. Specific application scenarios

(1) Electronic manufacturing industry

PCB board cleaning: Remove solder paste and flux residues, suitable for cleaning after SMT assembly.

Semiconductor packaging: Cleaning lead frames, ceramic substrates, etc.

(2) Automotive parts

Engine components: Remove oil stains and metal debris (such as cylinder blocks and pistons).

Transmission parts: Clean gears, bearings and other high-precision components.

(3) Metal processing

Stamping parts/sheet metal parts: Degreasing and rust removal to enhance adhesion in electroplating or spraying.

Cutting parts cleaning: Remove cutting fluid and metal powder.

3. Technical Advantages and Limitations

Advantages:

Efficient and fast: Suitable for large-scale continuous cleaning (such as in automotive production lines).

Flexible and adjustable: The nozzle Angle and pressure can be adapted to different workpieces.

Low cost: The equipment has a simple structure and is easy to maintain.

Limitation:

Insufficient cleaning depth: It is difficult to thoroughly clean complex inner holes or blind holes.

High water consumption: A water circulation system is required to reduce waste.

This time, Yangling Electronics mainly talking about the details of water-based steel mesh cleaning machin for stencil cleaning. If you are interested in our products, please contact Nancy to make an offer for you. Thank you.