JGH-016 PCBA Cleaning Machine for in SMT Production Line

Brief introduction

Off-line automatic PCBA washing machine is an energy-saving environmental protection, bulk cleaning integrated high-end cleaning machine, can automatically

complete the cleaning, rinsing, drying function.

Mainly used for aviation, aerospace, medical, new energy, automotive electronics and other high-end products such as high-end products, small and medium-sized

PCBA board cleaning, can effectively clean the SMT / THT PCBA welding surface residual rosin flux, water-soluble flux , No-clean flux / solder paste and other

organic and inorganic pollutants.

Specifications

Cleaning area size： 610mm(L)*560mm(W)*160mm(H) 2 layers

Cleaning area size Concentration tank capacity：40L

Dilution tank capacity：60L

Spray tank capacity：18L

Spray tank heater power: 6KW

Cleaning time：0~99Mins(Adjustive)

Cleaning temperature (liquid)： Room temperature -75 degrees / (adjustable)

Rinse time：1 minute / time (1-59 times / adjustable)

Rinse temperature (DI water)： Room temperature - 75 degrees/（Adjustive）

Drying time：0 to 99 minutes / (adjustable)

Resistivity meter monitoring range：0~18MΩ

Solvent tank heater power: 9KW

Drying Temperature: Normal Temp--99℃ /（Adjuistable）

Drying Heater/KW： 6KW

Spray Pressure： 30PSI - 90PSI/(Adjustive）

Chemical liquid level filter： 0.22μm (filter microparticles: solder paste, rosin, flux and contaminants)

DI water FIlter： 0.22μm (filter microparticles: solder paste, rosin, flux and contaminants)

water inlet：1 inch fast junction interface

Water outlet：1 inch fast junction interface

Chemical Inlet：1 inch fast junction interface

Real - time pressure gauge：3PCS (nozzle / DI water / waste liquid)

Horizontal spray pump： 5.5KW

Outlet size： Φ100W)×30mm(H)

Power source： AC380V 50HZ 65A/0.45MPa~0.7MPa

Weight： ~400Kg

Machine Dimension： 1400mm(L)×1350mm(W)× 1830mm(H)