Common Questions of Fully Automatic Water-Based Steel Mesh cleaner
What are the advantages of spray cleaning and ultrasonic cleaning?
1, the spray of cleaning liquid or water is filtered through four levels to the cleaning product, to ensure that the cleaning object will not cause second pollution when cleaning;
2. The cleaned pollutants will not settle at the bottom of the tank, basically in the filter bag or filter factor, and the filtration accuracy can reach 0.22UM;
3. spray cleaning volume is higher than ultrasonic, its efficiency is fast, cleaning volume is high efficiency; 4. High degree of spray automation, automatic switching of rinsing and drying in a spray room, small footprint and low device cost;
Will the tension of the board be damaged, and will the sealant be washed off?
Because the cleaning is a symmetrical spray arm, degree of cleanliness on both sides is basically the same, so the tension of the mesh board will not be damaged, for the sealing glue is related to the compatibility of the cleaning fluid, generally will not wash the glue;
How much cleaning fluid does it take to clean a cycle? How much will the concentration drop?
According to the data verified by our company, the liquid consumption of a cycle cleaning is about 150ml-200ml. Based on the liquid consumption of 20L per barrel, each additional liquid can be cleaned about 60 times.
Machine maintenance consumables, life?
Cleaning fluid recovery filter factor: can clean the micro-residual flux about 50 times, each need to replace 1.
Bleached DI water discharge filter factor: can clean the micro-residual flux about 150 times, each need to replace 1.
Air precision filter: according to the indoor air environment, about 3 months to change;
Spray room filter screen, device surface cleaning, liquid tank cleaning once a month; Labour
How long does a wash, rinse, dry cycle take? How many nets to wash at one time?
1, cleaning time: 2-3min;
2, rinsing time: 1min, drying time: 3-4min; Waiting for reflux, blowing liquid time: 0.5-1min;
3, a cycle time is: 5-7min;
4, cleaning area: 736(L) ×736mm(W) × 40mm(H)
5, clean one net board at a time;
After Yangling Electronics describing the mainly questions of fully automatic water-based steel mesh cleaner, do you have other confusion? If you are interested in our products, please contact Nancy any time.
Some information comes from the internet, if there is infringement, please contact us at 13580828702.
Characteristics of Steel Mesh Detection Machine
Brief Introduction Fully automatic water-based stencil cleaning machine
Related Article