Brief Introduction Fully automatic water-based stencil cleaning machine

Content parameter:

Effective cleaning size: 736mm(L) ×736mm(W) × 40mm(H)

Equipment appearance size: 1700mm(L) x 1200mm(W) x 2000mm(H)

Power/Air supply: three-phase five-wire system, 380V/18Kw (rated power) /0.45Mpa-0.7Mpa

Liquid tank capacity: > 80L*2

Spray tank dilution tank heater power: 6KW

Cleaning time: 3-5 minutes (solder paste)

Cleaning temperature (liquid) : normal temperature ~70℃ (adjustable)

Rinse time: 1-3 minutes (solder paste)

Rinsing temperature (DI water) : normal temperature ~70℃ (adjustable)

Drying time: 3-5 minutes /(adjustable)

Cleaning size range setting: 50-736mm

The machine weight is 750KG

The Fully Automatic Water-Based Stencil Cleaning Machine is designed to thoroughly clean stencils used in the application of solder paste onto PCB boards.  These stencils, which are critical in defining the circuit paths on the boards, often accumulate solder paste residues and other contaminants during the manufacturing process.  If not properly cleaned, these residues can lead to defects in the PCBs, such as solder bridging or insufficient solder deposits, which in turn can cause electrical failures.

​This cleaning machine operates on a fully automatic cycle, minimizing the need for manual intervention.  Equipped with high-pressure water jets, it effectively removes all residues from the stencil apertures.  The machine's intelligent system monitors the cleaning process, adjusting the pressure and duration to ensure optimal cleaning without damaging the delicate stencil patterns.

After Yangling Electronics describing the feature of fully automatic water-based stencil cleaning machine, you already have a simple understanding. If you are interested in our products, please contact Nancy. Next time, we will talk about the common questions of this fully automatic water-based stencil cleaning machine.

Some information comes from the internet, if there is infringement, please contact us at 13580828702.