JGH-D10 Plasma Surface Treatment Equipment for Rubber, PCB, PP, Silicone

Parameter of JGH-D10 Plasma Surface Treatment Equipment:

Characteristics: Low temperature plasma flow

Working environment: atmospheric pressure

Temperature: Low temperature (< 100℃)

Uniformity: Local precision processing

Applicable materials: plastic, film, medical equipment

Environmental protection: no VOCs, green technology

Characteristic of Plasma Surface Treatment Equipment

1. The plasma flow sprayed out is neutral, not charged, and can be surface treated for various polymers, metals, glass, rubber, PCB, PP, silicone, and other materials;

2. Improve the bonding strength, for example, PP material can be increased several times after treatment, and most of the surface energy can reach more than 60 dyne after treatment;

3. The surface performance after plasma treatment is durable and stable, and the retention time is long;

4. Dry method treatment of no pollution, no waste water, in line with environmental requirements;

5. It can be processed online on the production line to reduce costs.

Low temperature plasma flow treatment is the best method to modify the surface of three-dimensional objects. Its principle is shown in the figure. Ac high frequency high voltage is applied at both ends of the electrode, and the air between the two electrodes is flexibly ionized to produce gas arc discharge, and the shape is high enough to generate plasma region. The plasma reaches the treated surface under the blowing of the air stream to achieve the purpose of modifying the 3D surface.

This time, Yangling Electronics mainly talking about the specification of plasma surface treatment equipment, If you are interested in our products, please contact Nancy to make an offer for you. Thank you.