JGH-216 PCB Depaneling Machine's Features & Function

Brief Introduction

1. The equipment is used for multi-group multi-knife automatic split board, which can meet the lamp strip board with a width of more than 8MM, and the staggered knife can meet the lamp strip board with a width of more than 4MM

2. The machine can be changed quickly.

3. the electrical control part can be selected in the human-machine interface, easy to open or shield;

4. there is a man-machine interface, the table with acrylic cover to ensure safety

5. the overall use of floor type structure

6. two sets of knives suitable for aluminum substrate, FR4 substrate cutting, single set of knives suitable for FR4 substrate cutting

7. automatic line equipment frame adopts square welding frame, sheet metal sealing plate, surface baking steel paint;

8. the equipment work table is made of 45# steel plate or A3 steel plate, the surface is nickel-plated;

9. the overall size of the equipment: length 2160* width 570* height 1050 (the distance from the lamp strip to the ground is 900MM)

Machine Description

1. The use of multiple groups of upper and lower knives at the same time

2. The bottom of the equipment is installed with adjustable foot cup casters, which is convenient for the equipment to move, and needs to be stable and fixed when not moving; The height of the foot cup can be adjusted above 50MM;

3. Equipped with SMEMA interface can communicate with other equipment linkage, reserved network interface, follow-up factory Intranet;

4. Equipment use power: AC230V air source: 4-6Kgf /cm2

5. There are necessary safety protection devices;

6. The equipment needs to operate smoothly, there are necessary detection components;

7. According to the normal production capacity to reach 1500PCS/H or more

8. There are data monitoring statistics output: startup time monitoring, production capacity monitoring, equipment failure information and automatic rejection system

9. Using multiple groups of upper and lower knives at the same time

10. The distance between the upper and lower knives can be accurately adjusted, the plate thickness should meet :0.6MM-3.5MM The distance between the upper and lower knives can be accurately adjusted, the plate thickness should meet :0.6MM-3.5MM

11. The gap between the upper and lower knives can be adjusted according to the V-CUT spacing of the PCB board, and the accuracy is controlled at 0.1MM

12. The spacing between the two adjacent groups of blades can be adjusted between 8MM-25MM, which can quickly adjust the required width;

13. The material of the circuit board is: aluminum substrate, copper substrate, FR4, glass fiber board;

14. The speed of the transmission line can be adjusted;

15. The product taking and placing mechanism can be adjusted according to the width of the product;