Low-temperature bearing grease-The key material for ensuring stable operation of equipment in extremely cold conditions
I. Main characteristics of low-temperature bearing grease
Low-temperature bearing grease is made from high-quality synthetic base oils and combined with a special low-temperature thickening system and multi-functional additives, featuring the following significant properties:
Excellent low-temperature fluidity: It can maintain good lubrication at extremely low temperatures, ensuring smooth startup of bearings.
Low starting torque: Reduces frictional resistance in low-temperature environments, lowering energy consumption.
Good shear stability: Resistant to softening or loss over long periods of operation.
Outstanding anti-wear and anti-rust performance: Effectively protects the rolling elements and raceway surfaces of bearings.
Superior oxidation resistance: Extends the service life of the grease and reduces maintenance frequency.
II.Typical Technical Parameters (Reference Range)
|
Project |
Parameter range |
|
Operating temperature range |
-60℃ to +120℃ |
|
Base oil type |
Synthetic hydrocarbon oil/synthetic ester oil |
|
Thickener |
Lithium-based/complex lithium-based/special soap-based |
|
Working penetration (25℃) |
260-300 (0.1mm |
|
Low-temperature starting torque (-40℃ |
≤ 300 mN·m |
|
Evaporation loss |
≤ 1.0% |
|
Water resistance |
Good |
III. Differences from Ordinary Greases
Compared with conventional industrial greases, low-temperature bearing greases have obvious advantages in formula design and performance:
Stronger low-temperature adaptability: Common lubricating grease tends to harden below -20℃, while low-temperature grease can still function normally at -40℃ or even -60℃.
Superior starting performance: Effectively solves the problem of "freezing" or idling at low temperatures.
Higher-grade base oil selection: Uses low pour point synthetic oil, superior to mineral oil.
More severe application environment: Specifically designed for cold, freezing, and polar working conditions.
IV. Typical Application Scenarios
Low-temperature bearing grease is widely used in equipment and industries with strict requirements for low-temperature performance, including but not limited to:
Bearings for refrigerated storage and frozen storage equipment
Outdoor machinery in cold regions (wind power equipment, conveying systems)
Low-temperature bearing parts for railway and aviation auxiliary equipment
Polar scientific research equipment and automated instruments
Motors and Rolling Bearings in Food Cold Chain Transportation
This is the content Yangling Electronics mainly talking about. Please let Nancy know to make an offer for you If you are interested in custmized grease. Thank you.
Pharmaceutical-Grade Paraffin Oil Is Used in Pharmaceutical Equipment and Clean Production
XYC700 High-Load MoS2 Grease Used for Lubricating Transmission Pins Bearings and Heavy Machinery Components
Related Article